成人头条

Students working in the Crash Dynamics Lab will be part of the Advanced Virtual Engineering and Testing group. Primarily, students will provide support for maintaining instrumentation and ATDs in good working order and development of electrical control systems. Additionally, students will support preparation of crash tests for aerospace, military, and automotive seats, components, and vehicles. This position will be mostly hands-on experimental work and troubleshooting.

This position requires access to EAR or ITAR controlled technologies. Applicants are required to be eligible for employment under U.S. export control laws and must meet the requirement of being a 鈥淯.S. Citizen鈥�. Information will need to be collected in this regard, but will only be used to ensure compliance with U.S. export control laws. The University does not discriminate in its hiring practices and shall ensure compliance with all federal and state laws in the collection and reviews of such information collected.

Duties:

Development of electrical control systems
Electrical repair and troubleshooting
Verifying crash test dummies are in proper condition for testing
Digitizing test articles via CMM (FARO Arm) and Laser scanning
Supporting research and help documenting for mechanical testing
Moving and lifting large items by hand and hoist
Maintaining a clean and safe work environment
Qualifications:

Currently working towards a Major in Electrical Engineering
Willing to work a minimum of 20 hours per week during fall and spring semesters and 40 hours per week during summer break
Proficiency with hand and power tools
Strong attention to detail
Good communication skills
Ability to work in a team oriented environment
Preferred Skills:

Soldering
Electrical wire repair

To view the full position description and apply for consideration, click here:

The Quality Control, Dimensioning & Instrumentation Laboratory at NIAR is looking for a student assistant. All educational backgrounds matching the criteria below are welcome to apply. An engineering student is not a requirement.

This position requires access to EAR or ITAR controlled technologies. Applicants are required to be eligible for employment under U.S. export control laws and must meet the requirement of being a 鈥漊.S. Person鈥� as defined by 22 C.F.R. 120.15. 鈥淯.S. Person鈥� includes U.S. citizen, lawful permanent resident, refugee and those given asylum in the United States, and temporary residents granted amnesty OR eligible to obtain U.S. government authorization for this position by the time of hire. Information will need to be collected in this regard, but will only be used to ensure compliance with U.S. export control laws. The University does not discriminate in its hiring practices and shall ensure compliance with all federal and state laws in the collection and reviews of such information collected.

Qualifications:

Must be pursuing a degree at 成人头条.
Willing to work a minimum of 25 hours/week.
High attention to detail
Being organized
Reliable
Proactive
Responsible
Preferred:

Engineering solutions

Can be continually challenged with issues where finding quick and correct solutions is necessary.
Process Design

Can help design and make changes to assembly line processes to help improve processing time of workloads and minimize wasted materials.
Working with strict deadlines

Can complete required work on or before deadlines
Design (preferred not required)

Small design projects including CATIA based modeling for tooling and fixturing.
Programming

Can be challenged to help create programming solutions from scratch using Visual Basic and Microsoft Access to help keep track of inventoried items as well as manage expiration of chemicals.
Can maintain old programs which are already a part of our system which include Measurement verification software.
Job Duties:

Strain gage installation 鈥� Electrical Instrumentation
Surface Preparation
Dimensioning
Bonding
Soldering
Quality Check
Knowledge of ASTM & SACMA standards
Quality Control
Dimensioning of specimens
Documentation of unsat(s) characteristics for MRB purposes
Communicating unsatisfactory characteristics to the Program Manager

To view the full position description and apply for consideration, click here:

As a member of our Robotics and Automation group, you will be responsible for developing and designing automated systems for industrial applications. Our team conducts research and design for a diverse range of clients and is dedicated to advancing the field of intelligent manufacturing processes. Examples include systems developed to preform, automated inspection, robotic processing, automated damage repair. Alongside developing these systems, you will be responsible for enabling digital twin technologies through simulation, verification, and closed loop sustainment.

To be eligible for this position, applicants must be able to work with EAR or ITAR controlled technologies and meet U.S. export control laws, including being a "U.S.Citizen." All information collected in this regard will only be used to ensure compliance with U.S. export control laws. Our group does not discriminate in hiring practices and will comply with all federal and state laws in the collection and review of any information collected.

While the Robotics and Automation group can range from software development, to design, to fabrication, to controls, we welcome applicants of any major or academic standing. This is an excellent opportunity to gain hands-on experience in the field of automation and work on cutting-edge technologies with a dynamic team.

Minimum Qualifications:

鈥�         Pursuing a Bachelor鈥檚 or Master鈥檚 degree.

鈥�         Enthusiastic and willing to learn from a variety of specialist in the field of intelligent manufacturing.

鈥�         Must be able to work a minimum of 20 hours a week.

鈥�         Ability to work well in a team environment and effectively communicate ideas and solutions.

鈥�         Self-motivated and able to work without constant supervision.

鈥�         Ability to lift and carry up to 25lbs

路         Strong organizational and time-management skills.

路         Excellent communication and interpersonal skills.

Preferred Qualifications:

鈥�         Basic understanding of advanced materials, manufacturing processes, and an interest in it as a potential career.

鈥�         Working knowledge of programming languages such as VBA, C+, and MATLAB.

鈥�         Ability to work with CATIA, Siemens NX, or other CAD/CAM packages.

鈥�         Ability to work with and understand complex systems.

To view the full position description and apply for consideration, click here:

NIAR's Advanced Machining & Prototyping Lab (AMP) is looking for a student assistant.

This position requires access to EAR or ITAR controlled technologies. Applicants are required to be eligible for employment under U.S. export control laws and must meet the requirement of being a 鈥淯.S. Citizen鈥�.
Information will need to be collected in this regard, but will only be used to ensure compliance with U.S. export control laws. The University does not discriminate in its hiring practices and shall ensure compliance with all federal and state laws in the collection and reviews of such information collected.

Requirements:

Clean driving record.
Forklift Certified preferred.
Microsoft Suite proficient.
Ability to stand or sit for up to 6 hours at a time.
Ability to lift up to 50 lbs.
High attention to detail.
Responsibilities:

Working with our Operations Team to make packing lists to ship parts and deliver parts to customers as needed.
Receive material and parts from customers and shipping companies.
Moving material and parts throughout the shop as directed by Operations and Production Team.
Help with inventory, sort material and hardware as needed.
Final visual inspection and documentation of finished good.

To view the full position description and apply for consideration, click here:

The National Institute for Aviation Research (NIAR) Program Management Office (PMO) is looking for a student assistant to provide project management support working directly with the PMO director and the Program Managers in support of NIAR research program awards. 

This position requires access to EAR or ITAR controlled technologies. Applicants are required to be eligible for employment under U.S. export control laws and must meet the requirement of being a 鈥淯.S. Citizen鈥�. Information will need to be collected in this regard, but will only be used to ensure compliance with U.S. export control laws. The University does not discriminate in its hiring practices and shall ensure compliance with all federal and state laws in the collection and reviews of such information collected. 

Responsibilities:

• Assist with documenting the work breakdown structure, developing and monitoring project schedule, risk management, and project performance tracking and reporting for budget and schedule.
• Participate in project team meetings by taking and distributing notes/minutes and maintaining the project running action item log (RAIL).  

Skills:

• MS Outlook 鈥� proficient
• MS Excel 鈥� proficient
• MS PowerPoint 鈥� proficient
• Understanding of basic accounting and/or finance
• Strong attention to detail
• Strong organizational and multi鈥恡asking skills
• Ability to work effectively in a team environment
• Excellent verbal and written communication skills
• Strong business acumen
• Analytical

Education:

• Business鈥恟elated, Finance, Accounting, or Economics, preferred
• Junior or senior, preferred

Location:

• PMO located on the second floor of the main NIAR building on campus

Hours: 

• Minimum of 20 hours per week

To view the full position description and apply for consideration, click here: